Lowden Ltd
Tel: 01386 861 600

Fax: 01386 861 602

Sales@lowdenlimited.co.uk
We produce a full range of bismuth based low melting point alloys, also referred to as Cerro or fusible alloys.

We also supply pure metals, including Tin, Bismuth, Indium, Lead, Cadmium, Zinc and Antimony.

As well as the above products we also produce a Zinc repair stick for repairing galvanised finishes, as well as a full range of Ferro alloys and alloys that can be made to order.

If you are interested in other alloys, please click the link below to enter our main site.

Lowden Limited
Home

Zinc Repair Sticks (Zilt Sticks)

We are currently producing an alloy in stick form for the repair of galvanized items. These are similar to Zilt sticks

Alloy of Tin, Lead and Zinc produced in stick form.

Length Approx 250mm
Weight Approx 100g
Thickness Approx 9mm

We sell this product by the kilo, there are approx Ten sticks to the kilo
zilt stick zinc repair stick

Methods of use
If the item to be repaired has just come out of the galvanising bath and hence is still hot, the stick can simply be rubbed over the area required.

If the item is cold The method for there use is as follows:

Heat up the area of galvanising to be repaired ( take care not to exceed 200oC as this will damage the galvanised surface).
Heat up the end of the stick with blow torch or similar until the stick starts to melt.
Rub the end of the stick onto the area.
Re heat the stick and surface as required

Storage
Storage area should be : Cool, dry and well ventilated

© This is the web site of Lowden Ltd on the Internet. All copyrights and other intellectual property rights in the design and contents of this web site are reserved to Lowden Ltd. You may use it only as Lowden Ltd expressly permits you to. Any copying of the design or contents, or other unauthorised use, such as downloading and printing out any web pages, will infringe the rights of Lowden Ltd under international treaty and English law. Lowden Ltd is not responsible for the content of external Internet sites.